B&G H2000 Pilot *DISCONTINUED* - Manual (Page 29)

HB-0844-04
2-10
Expand Function Displays. When displaying the LOG and
TIMER functions the Enter Key can be used to expand the display.
Normally the Log function displays nautical miles to two decimal
places, i.e. 99.99nm (maximum). One press of the Enter Key
expands the display to 0099nm, giving a maximum available display
of 9999nm if required. Similarly the TIMER function normally
displays a minutes and seconds reading. Expansion by the Enter
Key displays hours and minutes instead.
2.1.6 Speed/Depth (SPD/DEP) Key
By pressing the SPD/DEP Key the user is able to select any one of three
factory set pages accessing the Speed and Depth functions. Successive
operation of the SPD/DEP Key will display the following information in a fixed
order:
Boat Speed/Depth
Boat Speed/Speed Over Ground (from NMEA Position Fix)
Boat Speed/Apparent Wind Angle
2.1.7 Wind Key
By pressing the Wind Key the user is able to select any one of three factory
set pages accessing the Wind Functions. Successive presses of the Wind
Key will display the following information in a fixed order:
Apparent Wind Speed/Apparent Wind Angle
True Wind Speed/True Wind Direction
Velocity Made Good/True Wind Angle
2.1.8
Navigation (NAV) Key
By pressing the NAV Key the user is able to select any one of three factory
set displays accessing the Navigation Functions. Successive presses of the
NAV Key will display the following information in a fixed order:
Current Heading/Course Over Ground
Current Heading/Boat Speed
Distance to Waypoint/Bearing to Waypoint