B&G H2000 Pilot *DISCONTINUED* - Manual (Page 38)

HB-0844-04
2-19
2.7.4 Switch Alarms On/Off
To switch OFF an alarm (HI, LO or SECTOR), scroll through until the
required item (e.g. HI OFF) appears in the text and press Enter.
To turn ON an alarm, press scroll through until the required item (e.g. LO ON)
appears in the upper text and press Enter.
2.7.5 Disable Alarms
(1) Select any function with an alarm facility, e.g. DEPTH.
(2) If function is in the top display press Scroll Down to scroll to
ALARMS, or if function is on the bottom use Scroll Up Key. Then
press Enter and ALL OFF appears flashing.
(3) Press Enter again, all alarms are turned OFF and the normal
page display will be restored.
WARNING - All alarms in the system will remain OFF until the values
are reset or the individual alarms are switched ON again.
2.8 TRIP FUNCTIONS
The Hydra 2000 provides three trip functions - Timer (count up and count
down), Trip Log and Dead Reckoning. The functions can be reset and
restarted as required, e.g. for keeping a separate log of elapsed time and
distance run for a given passage.
When any trip function is started, all other trip functions that have been reset
start with it, except when the timer countdown is started. Under this condition,
the other functions start again if previously reset, when the countdown
reaches zero. This is designed for the start of races, so that you have DR,
Resettable Log and Timer running, without pressing buttons during the
moments of the start itself.
When a trip function is displayed, the two right-hand characters show the
status of that function.