B&G H2000 Pilot *DISCONTINUED* - Manual (Page 32)

HB-0844-04
2-13
At this stage we have simply called up this function to view it, if the Page Key
is pressed then the configured page will return and Stored Log will no longer
be on view. If however you wish to keep Stored Log on a page, then you can
configure the page.
2.5.2
Page Display Configuration
The Page Key allows the user to configure four pages per FFD depending
on its required use at that position.
To store the setting in Para 2.5.1 as a permanent new page, proceed as
follows:
(1) Press Scroll Up or Scroll Down and scroll text until CNFG
DSP is shown on Display.
Note
Scroll Up or Scroll Down can be used because we are configuring the
whole page, both upper and lower displays.
(2) Press Enter, PAGE is shown on the lower display.
(3) Press Enter, the digital display is blanked and the two
functions selected are displayed in the upper and lower displays.
(4) Press Enter to accept the new page configuration and restore
the digital display.
All page displays are held in the display memory, independent of the power
supply.