Bio-Rad Image Lab™ Software - Manual (Page 116)

5 | Viewing Images
116 | ChemiDoc MP Imaging System with Image Lab Software
Displaying Data
You can view results from analyzed data associated with a gel image using an
analysis table, a lane profile, a standard curve, or a report.
The buttons in the main toolbar turn these views on or off. You can view your data
with all views simultaneously.
Analysis Table Options
Numerical data associated with an analysis can be viewed in an analysis table. Data
from the Lane and Band analysis can be viewed in the Lane and Band Table tab. If
volume analysis was performed, these data can be viewed in the Volume Table tab.
The buttons above the table provide options for displaying and exporting analysis
table data.
To change the size of the Analysis Table window
 Move your cursor to the top of the window until it changes into a
double-headed arrow. Click and drag the edge of the window until you can see
all of the data.
Note: Resizing the Analysis Table window is restricted when a protocol window
is open.