Bio-Rad Image Lab™ Software - Manual (Page 221)

Setting Up Image Lab Users and Groups
User Guide | 221
If this checkbox is selected, only users and groups that are defined on the local
computer (on which Image Lab is installed) are recognized. If this checkbox is not
selected, only users and groups that are defined on the network domain are
recognized.
Finding the name of your authentication domain
Your authentication domain can be hosted on your local computer (a local domain)
or on a network server (a network domain).
To find the name of your local domain
1. From your Start menu, open the Control Panel.
2. Click System.
The System window appears. In the Computer name, domain, and workgroup
settings section, the name of your local computer is shown as Computer name.
This checkbox specifies whether
valid users and groups are defined
on (1) the local Image Lab
computer, or (2) on the network
domain.