Bio-Rad Image Lab™ Software - Manual (Page 252)

F | Mitsubishi P93/P95 Thermal Printer
252 | ChemiDoc MP Imaging System with Image Lab Software
Setting up a Thermal Printer on a Mac
The printer driver can be found on the Image Lab software installation CD in the
Misc directory.
To set up a thermal printer on a Mac system
1. Install the printer driver.
2. Connect the printer to the computer.
To configure the correct paper size
1. Start Image Lab software.
2. Select File > Page Setup.
3. In the Settings dropdown list, select Page Attributes.
4. In the Format For dropdown list, select the Mitsubishi printer.
5. In the Paper Size dropdown list, select 1280 x 1280.
6. In the Settings dropdown list, select Save as Default.
7. Click OK to save the settings.