Bio-Rad Image Lab™ Software - Manual (Page 117)

Displaying Data
User Guide | 117
Display Data Options
The Display Data Options dialog box has three tabs.
 Measurements — enables you to choose the measurements to display in
the table. Use the arrows to move the columns between the Not Displayed
pane and the Displayed pane. By default, all measurements are displayed
in the Analysis table.
Note: For a description of each Lane and Band measurement type, see
Lane and Band Table Measurement Definitions on page 119 . For a
description of each Volume measurement type, see Volume Measurement
Definitions on page 119 .
 Display — enables you to set the display for the analysis table. The
following settings appear on the Display tab:
 Default display settings — The Move selected lane to top checkbox is
selected by default. When you click a lane on the image, the Analysis table
scrolls so that the data for the selected lane appears first in either the
vertical or horizontal view of the table.
 Per Measurement Precision — set the precision (decimal places) for the
measurements in the Lane and Band table and the Volume table.
 Example — shows an example of how measurements will display with the
selected measurement and precision settings.
 Export — enables you to choose how to export the analysis data. The
following settings appear on the Export tab:
 Export formatting — select checkboxes to include lane headers (Lane
and Band table tab only) and/or column headers in the exported file.
 Export delimiter — select a delimiter option for the exported file.
 Comma delimited
 Tab delimited
 Use other delimiter (user defined)