Jeppesen FliteDeck 3 - Manual (Page 102)

105
Plan Page
Use the Plan page to create or edit a route in FliteDeck:
• Insert, delete, or move waypoints within routes.
• Set altitudes on routes.
• Control the behavior of an active route from a GPS.
This chapter covers the following topics:
• Basic Components
• Working with Routes
Basic Components
The basic components on the Plan page (clockwise) are:
• Route Waypoint List
• The Chart Component
• Waypoint function buttons that perform actions on a selected waypoint
• The Enter Waypoint Text Box
Depending on what you selected in the FliteDeck Setup program, you may also have:
• The Virtual Keyboard
• A Supplemental Track Indicator (STI) . For additional information about the
STI see the Enroute Nav page .
After you have used FliteDeck, the initial page opens with your most recently-used or
saved route.