Jeppesen FliteDeck 3 - Manual (Page 126)

Plan Page
129
Inserting Waypoints Using the Chart
If you have a mouse or other pointer, you can add waypoints by clicking on the
chart.
1. Click an airport, navaid, intersection, or any chart location to add that
waypoint to the Enter Waypoint text box.
NOTE
Clicking in an open area of the chart enters the latitude/longitude of that
location in the Enter Waypoint text box.
2. Click Insert Waypoint.
3. Click the Move Up (F8) and Move Down (F9) arrows to place the waypoint
where you want it in your active route.