Jeppesen FliteDeck 3 - Manual (Page 131)

JeppView FliteDeck User's Guide
134
TIP
If you accidentally delete data from a route, you may be able to recover
by exiting FliteDeck without saving the RoutePack.
Going Direct To a Waypoint
Direct To allows you to navigate directly to any waypoint or location, without clearing
your route from the Plan page. You can easily resume your planned route at any
time.
1. Click Clear Waypoint (ESC) to clear any text from the Enter Waypoint text
box.
2. Select a waypoint or location that you would like to navigate direct to:
• Click a waypoint or location on the chart.
• Type a waypoint name or location (latitude/longitude or
bearing/distance reference) into the Enter Waypoint text box.
3. Click Direct To (F7).
NOTE
The Direct To button is always labeled with the name of the selected
waypoint, or is labeled WP1, WP2 if you have selected a location other
than a named waypoint.
4. Go to the Enroute Nav page.
• The active waypoint is now your Direct to waypoint.