Expanding your regional coverage area, Adding coverages electronically, Adding coverages from the electronic chart data cd – Jeppesen FliteDeck 3 User Manual
Page 40
Installation and Activation
43
You are responsible for the accuracy of your flight plans and navigation information,
as well as the currency of your data. You must satisfy yourself that this information
is acceptable before using it for your operations. Click I understand and accept
this warning to start.
NOTE
FliteDeck uses your computer clock to determine your data status.
Ensure that your clock reflects the accurate date, time and time zone.
To update your data, see
Keeping Your Programs Up-to-Date
Expanding your Regional Coverage Area
Contact a Jeppesen Customer Service Representative
to request a new coverage or
multiple coverages. After you have contacted Jeppesen, you can add the new
coverage area to your subscription by using the electronic update feature or the
Electronic Chart Data (ECD) Disc 1 and ECD Disc 2.
Adding Coverages Electronically
Please wait at least 30 minutes from the time you contacted a Jeppesen Customer
Service Representative before initiating an electronic download of new regions. This
gives the Customer Service system time to refresh your information in the Update
Server.
To add the new coverage area electronically:
1. Close JeppView FliteDeck (if it is open), and open the FliteDeck Setup
Program by clicking Start > Programs > Jeppesen > JeppView
FliteDeck3 > FliteDeck3 Setup.
2. On the Configuration tab, click Get Update.
3. FliteDeck logs in to the Update Server, finds your new information, and adds
the new coverage areas to your permanent subscription.
Adding Coverages from the Electronic Chart Data CD
You can add coverage areas to your subscription from the Electronic Chart Data
(ECD) Discs.
to request the new coverage or coverages. You will
receive a unique coverage code for each new region you are adding. The coverage
code is only applicable to the ECD Disc 1 you have available (preferably the most
recent). When you call Customer Service, tell the representative which terminal chart
revision cycle you are using. The cycle number is recorded on the Electronic Chart
Data CD label in this format: 08-2005, representing the revision number (08), and
the year (2005). Regional codes change every two weeks, so a code for the wrong
cycle does not work.
To add new coverages from the ECDs:
1. Insert the current ECD Disc 1 before it expires.