Jeppesen FliteDeck 3 - Manual (Page 127)

JeppView FliteDeck User's Guide
130
4. Click Execute (F7) to confirm your change, or Cancel (ESC) to abandon it.
The Quick Insert Method
The quick plan method cuts some steps out of the previous procedures, but like most
shortcuts, it is not as obvious. To use the quick insert method:
1. Click Clear Waypoint (CLR) to clear any text from the Enter Waypoint text
box.
2. Using either the chart or the Enter Waypoint text box, select a waypoint not
currently in your route.
3. Click the existing waypoint in the Waypoint Route list to insert the new
waypoint before it.
4. Click Execute (F7) to confirm the insertion, or Cancel (ESC) to abandon it.