Jeppesen FliteDeck 3 - Manual (Page 77)

JeppView FliteDeck User's Guide
80
5. Close JeppView FliteDeck if it is open.
Create and Check Connection
1. Open HyperTerminal to test and verify the COM port and BAUD rate by
clicking Start > Programs > Accessories > Communications >
HyperTerminal.
2. In the Connection Description dialog box, enter a unique name in the Name
field, select an icon, and then click OK.
3. In the Connect using drop-down menu, select the COM Port that the
Bluetooth GPS software has created, and then click OK.