Jeppesen FliteDeck 3 - Manual (Page 158)

Terminal Page
161
• On the Plan page, enter an airport in the Enter Waypoint text box, and click
Info: [Airport] or click the airport name to the right of the Enter Waypoint
Text Box.
• On the Terminal page, click Info: Airport.
• On the Enroute Nav page, click on an airport in the enroute chart and click
Info: [Airport].
• On the Enroute Map page, click on an airport in the enroute chart and click
Info: [Airport].
The Airport Information is organized in four sections: General, Communication
Frequencies, Runway/ Navigation Frequencies, and Weather. To view any of the
information, click on the labeled button.
• General information contains airport information about location, latitude and
longitude coordinates, elevation, time zone, fuel types and services. For US
airports, it also displays what paper sectional the airport resides on. If an
active XM weather connection is available (see Weather ), there is also textual
information about any nearby Temporary Flight Restrictions (TFRs).
• Comm Freqs displays communication frequencies for the selected airport.
• Runway Nav Freqs displays runway information including size, surface
conditions, touchdown zone elevation (TDZE), localizer ID, frequency and
bearing. This page also displays nearby navigational aids.
• Weather accesses information from an XM receiver and displays METARS,
Terminal Area Forecasts, and City Forecasts.
To move up and down the pages:
• Click/tap on the provided up and down arrow keys.
• Use the UP and DOWN ARROW keys on the keyboard. Holding the arrow keys
down scrolls the information faster.
• Use the +/- keys to change font size within a tab.
Click Cancel to exit the Airport Information page.
Using the Clipboard
Just as you might use a kneeboard to hold the charts you expect to use for a trip,
the clipboard lets you pre-select and organize charts for your journey.
Identifying Clipboard Icons
The following clipboard icons are used throughout the Terminal page and sub-pages.