Jeppesen FliteDeck 3 - Manual (Page 57)

JeppView FliteDeck User's Guide
60
• Setting Up the Chart Viewer
• Using the Chart Viewer
The Chart Viewer Overview topic illustrates the Chart Viewer layout and
explains how to get around.
The Chart Viewer was designed for the following work flow:
1. Set the clipboard airports
2. Add terminal charts to each airport clipboard
3. View the clipboard charts
You can also view airport information and airway manual pages in the
Terminal Chart Viewer:
o
Airport Information
o
Airway Manual text
Setting Up the Chart Viewer
When you run FliteDeck for the first time on a computer, the FliteDeck Setup
program opens automatically to the Configuration tab. Click Interview, at the lower
left, to set your preferences using a wizard.
The completed Interview returns you to the Setup Configuration tab. Enter your
screen resolution as described below in "Setting Display Size".
NOTE You can return to Setup to change these settings at any time.
Changing the Display Style
If you have already run FliteDeck on your computer, you can skip the Interview and
set the Chart Viewer configuration directly in the FliteDeck Setup application.
1. Close FliteDeck.
2. Go to Windows Start > Programs > Jeppesen > JeppView FliteDeck3 >
FliteDeck 3 Setup.
3. In the Select a Display Style box at the top of the Configuration tab,
select Jeppesen Terminal Chart Viewer.
4. Set your screen resolution in the Display Size box as described in the next
section.