Jeppesen FliteDeck 3 - Manual (Page 129)

JeppView FliteDeck User's Guide
132
FliteDeck draws the proposed route on the chart with a green dashed line and
shows the proposed change to your route list.
• If the new location is a waypoint in the database (airport, VOR, NDB,
intersection) the identifier for that waypoint appears in your route list.
• If a new location is not a waypoint in the database, FliteDeck creates a
new waypoint at that location. These are labeled as WP1, WP2, and so
on in your route list.
2. Click Execute (F7) to confirm your change, or Cancel (ESC) to abandon it.
TIP
If you meant to drag the route over an airport, VOR, NDB, or intersection,
but “missed” and created a new waypoint, zoom in closer and try again.
Deleting a Waypoint