Jeppesen FliteDeck 3 - Manual (Page 109)

JeppView FliteDeck User's Guide
112
• If the Select Waypoint button displays on the right side of the
screen, it means FliteDeck has found more than one match for the
entry. Press ENTER or click Select Waypoint to see a list of matches.
The Routes and Waypoints block in the upper left corner of the screen shows the
search results that match the entry.
Select the waypoint you want by doing one of the following:
• Click the waypoint.
• Press the function key (F1, F2, and so on.) for the waypoint.
• Use the UP and DOWN arrow keys to select the desired waypoint, and then
press ENTER.
• Perform the desired action on the waypoint (direct to, insert, append) using
the buttons on the right side of the Plan page.
Tips
• If the chosen waypoint to the right of the Enter Waypoint text box is not the
one you want, press ENTER, or click Select Waypoint to choose from a list.
• If the chosen waypoint is the one you want, use the waypoint buttons to
immediately insert or perform other actions with that waypoint.
• To abandon entering a waypoint click Cancel (ESC).
• FliteDeck uses these rules to pick which waypoint displays in the scratchpad:
o
Exact matches have top priority.
o
Number of characters entered and identifier length. For example, NDB
identifiers are usually two characters, so an exact-match NDB is picked for a
two-character entry. VORs are generally three characters, so an exact-match
VOR is picked for a three-character entry. The same applies for airports and