Jeppesen FliteDeck 3 - Manual (Page 39)

JeppView FliteDeck User's Guide
42
Starting FliteDeck
To start FliteDeck, do one of the following:
• Click Start > Programs > Jeppesen > JeppView FliteDeck3 >
FliteDeck3.
• Click the Jeppesen FliteDeck icon on your desktop.
The first time you open FliteDeck, the Setup Interview guides you through some
initial settings. For more information about the FliteDeck Setup program, see
FliteDeck Setup .
Opening Warning
Each time you open JeppView or FliteDeck, you see a warning with the effective date
of your Electronic Chart Data, the issue date of your terminal chart data, and the
cycle number of your Electronic Text Pages. Check the dates carefully. When the
data becomes obsolete, the fonts on the warning change color:
• For NavData cycles, red signifies the data has expired and an update is
needed to ensure safety of flight.
• For terminal chart cycles, the next issue date is highlighted in gray with the
number of days until, or after availability. You must ensure that you are flying
with current flight information, and comply with all FARs regarding pre-flight
planning and required or recommended flight information. It is recommended
that you update your chart data as soon as possible.
If you do not want the warning message to appear, select the Don't show this
warning again check box. As long as the data is current FliteDeck opens without
displaying the Welcome dialog. When the data goes beyond the effective or
recommended dates:
• The warning message appears regardless of the Don't show this warning
again check box selection.
• The Don't show this warning again check box is unavailable.