Jeppesen FliteDeck 3 - Manual (Page 31)

JeppView FliteDeck User's Guide
34
3. If prompted, select JeppView and click OK.
4. Select the check box to continue and click Next.
5. Click Yes to deactivate JeppView.
6. Select a deactivation process (we recommend that you select the Internet
(Automated) method if you have an Internet connection), and click Next.
7. Enter your serial number and deactivation code, and click Finish.
8. Insert ECD Disc 1 and complete the installation.
Electronic Chart Data Disc 1
The first installation of JeppView requires ECD Disc 1 and 2. Thereafter, update the
data every 14 days through the Internet or with the CD updates received in the mail.
To install your terminal charts, follow these steps:
1. Insert ECD Disc 1 into your computer CD-ROM drive. If the setup program
doesn’t start automatically, browse to your computer CD-ROM drive and
double-click setup.exe.
2. If you deactivated a JeppView 3 serial number, enter your new serial number
and click Next.
o
JeppView MFD Users Only : If this is your first time installing ECD Disc 1,
click Yes to install JSUM. JSUM transfers the electronic chart data to the
media used with your MFD system.
o
JeppView MFD Users Only : If applicable, select the Run Jeppesen
Services check box and click Next. This option launches the Jeppesen
Services Update Manager (JSUM) near the end of the ECD Disc 1 update. This
option is only available if JSUM is already installed.
3. Verify that the terminal chart coverage(s) listed for your serial number are
the same as what you have purchased.
A. The first time that you install ECD Disc 1 on a given computer, you may not
see any coverages. If that occurs, a box for entering a coverage code appears
near the bottom of the Setup window.
B. Type the coverage codes from the front of your JeppView CD album (below
the serial number), and then click Apply.
NOTE
Coverage codes change with each terminal chart cycle. If the coverage
code you have no longer works, or you don’t have a coverage code, or
you don’t see the coverages you need after entering your codes, have
your order number or customer number available and contact Jeppesen
Customer Service . After you have the codes you need, complete the