Jeppesen FliteDeck 3 - Manual (Page 172)

Enroute Nav Page
175
• On the Terminal page, click Info: Airport.
• On the Enroute Nav page, click on an airport in the enroute chart and click
Info: [Airport].
• On the Enroute Map page, click on an airport in the enroute chart and click
Info: [Airport].
The Airport Information is organized in four sections: General, Communication
Frequencies, Runway/ Navigation Frequencies, and Weather. To view any of the
information, click on the labeled button.
• General information contains airport information about location, latitude and
longitude coordinates, elevation, time zone, fuel types and services. For US
airports, it also displays what paper sectional the airport resides on. If an
active XM weather connection is available (see Weather ), there is also textual
information about any nearby Temporary Flight Restrictions (TFRs).
• Comm Freqs displays communication frequencies for the selected airport.
• Runway Nav Freqs displays runway information including size, surface
conditions, touchdown zone elevation (TDZE), localizer ID, frequency and
bearing. This page also displays nearby navigational aids.
• Weather accesses information from an XM receiver and displays METARS,
Terminal Area Forecasts, and City Forecasts.
To move up and down the pages:
• Click/tap on the provided up and down arrow keys.
• Use the UP and DOWN ARROW keys on the keyboard. Holding the arrow keys
down scrolls the information faster.
• Use the +/- keys to change font size within a tab.
Click Cancel to exit the Airport Information page.
Viewing Only the Enroute Map
In the Enroute page, you can hide most of the information components (Flight
Information blocks, the STI, and the profile view) to see more of the enroute map.
Click ENRT MAP near the status bar. With a keyboard, press PAGE DOWN.
The following actions and features are still available in the enroute map view: