Jeppesen FliteDeck 3 - Manual (Page 137)

JeppView FliteDeck User's Guide
140
Before you get to B, ATC assigns you a vector to intercept the course from B to C. In
this case, you want to set C as your active waypoint.
To set a waypoint as your active waypoint:
1. Click Clear Waypoint (ESC) to clear any text from the Enter Waypoint text
box.
2. Select the waypoint in the Route Waypoint list that you want to make active.
FliteDeck marks this waypoint with an asterisk (*).
3. Click Set Active Waypoint.
Suspending Waypoint Sequencing — Sequence Hold
There are times when you need to suspend FliteDeck’s automatic waypoint
sequencing:
• Holding.
• Overflying a single waypoint more than once during an approach procedure
(and you haven’t inserted the waypoint multiple times into your route).
• Approaching the runway threshold during an instrument approach. Most
missed approach procedures require maneuvering (e.g. climbing straight
ahead to a certain altitude) prior to proceeding to the next waypoint.
The sequence button on the Plan page places the current status of sequencing on the
label.
• When sequencing is on, the label reads Sequencing:ON.
• When sequencing is off, the label reads Sequencing:OFF.