Jeppesen FliteDeck 3 - Manual (Page 86)

FliteDeck Setup
89
Vertical Planning
FliteDeck can help you decide when to begin your descent to reach a waypoint at the
correct altitude. In this section, set the desired values for target altitude at and
distance from the waypoint you are descending to. You can select your destination
(Dest WP) or your active waypoint (Active WP) for descent planning.
Profile View Display Options
You can change whether the mileage scale along the top of the Profile view shows
distance along the route or distance remaining in the route. Select Display mileage
on profile as distance from end of route to show distance remaining in the route.
Minimum Flying Ground Speed
Enter the minimum ground speed at which FliteDeck should assume you are airborne
and begin sequencing of the route waypoints.
Routes Tab
The Routes tab is where you select which saved RoutePacks you want available
during flight.