Jeppesen FliteDeck 3 - Manual (Page 73)

JeppView FliteDeck User's Guide
76
1. Go to Control Panel (using one of the following methods):
o
Open My Computer and click Control Panel.
o
Click Start > Settings > Control Panel.
o
Click Start > All Programs > Control Panel.
2. Choose Display, and then click the Settings tab.
3. Drag the screen resolution slider to the left or right to select the desired
resolution.
4. Click Apply.
Windows displays the new screen resolution. If this works for your computer, click
OK. If not, try a different setting. If your screen goes blank, wait 15 seconds, and
Windows will return to your previous setting.
Other Information on the Configuration Page
Below the configuration setup, there is a block with the following information:
• Configuration file location and other file information.
• Program version number.
• Electronic Chart Data cycle and expiration dates.
• Terminal Charts cycle, and expiration.
• Valid dates for the installed Text Pages.
IMPORTANT
Electronic Chart Data expires every 14 days. In the interest of
flight safety, it is essential that you keep your Electronic Chart
Data up-to-date.
Get Update
Click Get Update to update your navdata, charts and program via the Internet. You
must have a current subscription service and activated software (see
Keeping Your
Programs Up-To-Date ).
GPS Tab