Kontron NSW1U IP Network Server - Manual (Page 32)

NSW1U Network Server—Server Installations and Upgrades
Kontron IP Network Server NSW1U
Product Guide, rev. 1.4 December 2009
32
3.3.2 Configuring Memory DIMMs
The Server Board S5000PHB server board supports up to six DDR2-533 or DDR2-667 Fully Buffered
DIMMs (FBD memory) in six DIMM slots across two channels, Channel 0 and Channel 1.
Channel 0 consists of DIMM sockets A1, A2, and A3. Channel 1 consists of DIMM sockets B1, B2, and
B3. See Figure 15 .
The two channels support registered DDR2-533 and DDR2-667 FBDIMM memory (stacked or
unstacked). Peak theoretical memory data bandwidth is 6.4 Gbytes/s with DDR2-533 or 8.0 Gbytes/s
with DDR2-667.
Table 4 and Table 5 show the maximum memory configurations supported using the specified
memory technology.
Figure 15. Memory Sparing DIMM Configuration
Table 4. Maximum Six-DIMM System Memory Configuration - x8 Single Rank
DRAM Technology x8 Single Rank Maximum Capacity
256 Mb 1.5 GB
512 Mb 3 GB
1024 Mb 6 GB
2048 Mb 12 GB
Channel 1
Channel 0
DIMM Soc
kets
DIMM A1
DIMM A2
DIMM B3
DIMM B2
DIMM A3 DIMM B1
AF000879