4 optional component installation procedures, 1 before you begin, 1 tools and supplies needed – Kontron NSW1U IP Network Server User Manual
Page 45: 2 system references, 3 cable routing reference, Optional component installation procedures, Before you begin 4.1.1, Tools and supplies needed, System references, Cable routing reference
Advertising
Kontron IP Network Server NSW1U
December 2009
Product Guide, rev. 1.4
45
Optional Component Installation Procedures—NSW1U Network Server
4
Optional Component Installation Procedures
4.1
Before You Begin
4.1.1
Tools and Supplies Needed
• #1 and # Phillips* (cross-point) screwdrivers (or interchangeable-bit screwdriver with #1 and #2
Phillips bits)
• Anti-static wrist strap and conductive foam pad
4.1.2
System References
All references to left, right, front, top, and bottom assume that you are facing the front of the server,
as it would be positioned for normal operation.
4.1.3
Cable Routing Reference
It is important for cables to be routed correctly.
shows the power and signal connections for
all system components.
Advertising