Kontron NSW1U IP Network Server - Manual (Page 66)

NSW1U Network Server—Server Component Replacements
Kontron IP Network Server NSW1U
Product Guide, rev. 1.4 December 2009
66
5.2.2 Installing the New CPU Fans into the Bracket
1. Align each fan with the air flow arrow facing the rear of the chassis and the power cable facing the
front and routed away from the fan blades.
2. Push each of the three fans into one of the pockets in the fan assembly bracket.
The power cables should exit the bracket as shown in Figure 50 .
Figure 49. Fan with Isolation Bumpers Installed
Figure 50. Fans Properly Installed in the Bracket
TS000402
TS000404