Installing a smart embedded usb solid-state drive – Kontron NSW1U IP Network Server User Manual

Page 61

Advertising
background image

Kontron IP Network Server NSW1U

December 2009

Product Guide, rev. 1.4

61

Optional Component Installation Procedures—NSW1U Network Server

4.7

Installing a SMART Embedded USB Solid-State Drive

The optional SMART Embedded USB Solid-State Drive (eUSB SSD)provides local memory storage for

various options such as system information, diagnostic partitions, and configuration data. The eUSB

SSD is positioned perpendicular to the EFP board and fastens to the PCI fan air duct.

1. Remove the chassis top cover. For instructions see

Section 3.2.1, “Removing the Chassis Cover”

on page 25

.

2. Remove the PCI fan air duct as shown in

Figure 44

.

Figure 44.

Removing the PCI Fan Air Duct

TS000504

A

B

Advertising