Kontron NSW1U IP Network Server - Manual (Page 62)

NSW1U Network Server—Optional Component Installation Procedures
Kontron IP Network Server NSW1U
Product Guide, rev. 1.4 December 2009
62
3. Attach the interposer card to the PCI fan air duct with the two black push rivets in the kit. (“A” in
Figure 45 )
..
4. Attach the eUSB SSD to the interposer card. (“A” in Figure 46 ). Insert and tighten the screw that
will secure the eUSB SSD to the interposer card. (“B” in Figure 46 )
Figure 45. Attaching the Interposer Card to the Air Duct
Figure 46. Attaching the VSSD to the Interposer Card
A
TS000505
TS000506
A
B