Kontron NSW1U IP Network Server - Manual (Page 78)

NSW1U Network Server—Server Component Replacements
Kontron IP Network Server NSW1U
Product Guide, rev. 1.4 December 2009
78
5.6.1 Installing the Battery Insulator
If you are installing the battery on a new server board or replacing it on a server board that does not
have the protective insulator surrounding the battery, use the following procedure to install the
insulator.
1. Fold the battery insulator along the scored bend lines as shown in Figure 60 and insert the tab in
the slot to fasten the insulator.
Figure 60. Folding the Battery Insulator
TS000417
A
B C D