Rice Lake MA37 Sartorius Moisture Analyzer - Manual (Page 20)

20 Operating Instructions Moisture Analyzer MA37
Operating the Moisture Analyzer
Operating the Moisture Analyzer
Switching the Analyzer On and Off (Standby)
y The main screen appears after the moisture analyzer has been switched on .
– The default language for the display text is English .
– You can change the language (see “Setting the Language” on page 21) .
t t To switch the moisture analyzer to standby, select the menu key at the bottom
left of the main screen on the display .
y The menu is displayed .
t t Select the j button in the menu .
y The moisture analyzer switches to standby mode .
t t To switch the moisture analyzer on again: Select j on the display .
The moisture analyzer starts in the method most recently used before the
analyzer was last switched off .
Moisture in %M
Start new measurement
Standard
Fully automatic
105 °C
Wednesday, 2014-01-08 16:50
Moisture in %M
Standard drying 105 °C
Standby temperature -
Initial weight -
End Fully automatic
Target value -
No automatic printout