Device information, Calibration/adjustment, Printout – Rice Lake MA37 Sartorius Moisture Analyzer User Manual
Page 28
28
System Settings (Setup Menu)
Operating Instructions Moisture Analyzer MA37
Device Information
The manufacturer, model, serial number and software version of the moisture
analyzer are displayed here .
Calibration/Adjustment
Calibration/Adjustment
MA performance test
Weighing system adjustment
Calibration report
The settings for calibration and adjustment of the moisture analyzer can be defined
here .
Under
MA performance test
:
Test functions for different temperature ranges are available here . You can only use
these functions with the ReproEasy pad (accessory) .
Under
Weighing system adjustment
:
t
Select the option of your choice .
–
CAL-Extern
: Carry out calibration with an external calibration weight
(see Chapter “Calibration and Adjustment”) .
–
Weighing only
: Use the weighing function to use the moisture analyzer
as a simple lab balance (see Chapter “Calibration and Adjustment”, section
“Weighing”) .
Under
Calibration report
:
Here you can access the most recent calibration reports for the MA performance
tests and weighing system adjustments . Up to 99 reports are saved per day .
Calibration reports older than 30 days are deleted .
Printout
You can configure the settings for printing and data output here . Some of
the settings depend on the configuration of the USB interface (see Chapter “USB
Interface” on page 30) .
Under
Printout measurement
:
t
Select the settings for printing out the results on the connected lab printer .
–
Printout measurement
: The printout can be activated and deactivated
during the measurement here .
–
Interim results
: If the printout is activated, you can also activate the
output of intermediate values during the measurement here .
–
Interval [sec]
: Enter the desired interval in seconds for the output of the
intermediate results .
Under
Printout and report format
:
t
Configure all settings for the output format .
–
Result only
: Only the result of the moisture analysis is output .
–
With GLP and method parameters
: The GLP data and parameters used for
the moisture analysis are also output .
Device information
Manufacturer:
Sartorius
Model:
MA37
Serial number:
0034002458
Version BAC:
00-53-01.01 CN:1701
Version APC:
01-80-01.05 CN:0000
Version DOC:
07-40-03.00 CN:0000
Calibration report
MA performance test
Weighing system adjustment
Printout
Printout measurement
Printout and report format