Rice Lake MA37 Sartorius Moisture Analyzer - Manual (Page 26)

26
System Settings (Setup Menu)
Operating Instructions Moisture Analyzer MA37
System Settings (Setup Menu)
The Settings (Setup) menu contains all basic settings for the moisture analyzer .
Opening the Menu and Changing the Settings
t Select the menu key on the main screen .
Moisture in %M
Standard drying 105 °C
Standby temperature -
Initial weight -
End Fully automatic
Target value -
No automatic printout
y The menu is displayed .
t Select the i (Setup) key in the menu .
Settings
Language
Date and time
Device information
Calibration/Adjustment
Printout
y The Settings menu appears .
Settings
Signals
Date and time
Device information
Calibration/Adjustment
Printout
t To scroll, place your finger on the display and drag it slowly either up or down .
y The entries on the display move in the corresponding direction . While you are
scrolling, a gray scroll bar appears on the right of the display, indicating where
you are in the list of options .
t Select a setting and make the desired change . Information about the available
settings can be found from page 27 .
t Select l to confirm your changes .
t Select ; to return to the menu . The changed settings are active when you reach
the first level of the menu again .