Rice Lake MA37 Sartorius Moisture Analyzer - Manual (Page 57)

57
Care and Maintenance
Operating Instructions Moisture Analyzer MA37
Care and Maintenance
Service
To ensure its continued weighing accuracy, we recommend performing regular
servicing on your analyzer at least once a year . The Sartorius Service Center offers
different service contracts for this purpose, which can be individually adapted to
suit your needs (see also www .sartorius .com/service) . Each service produces a
calibration certificate . The analyzer and its connections must undergo a technical
safety inspection on a regular basis carried out by an electrician (e .g ., every 2 years) .
Repairs
Repair work must only be carried out by trained service technicians . The analyzer
must be unplugged during repair work . Unplug the power cable from the socket .
Failure to do so may affect the measurement accuracy of your analyzer and pose
a serious risk to the user . Contact the Sartorius Service Center or a Sartorius dealer
to arrange for proper repairs .
Cleaning the Analyzer
Cleaning the Control Panel
Switch the display to standby mode to avoid modifying the settings for operation
during cleaning .
t Select the menu key to switch to the method menu .
t If you then select j , the display is switched off .
t To switch the display back on: Select j at the bottom left of the display .
The moisture analyzer starts in the application most recently used before the
analyzer was last switched off .
Cleaning the Housing
Disconnect the analyzer from the power before cleaning . Disconnect any data
cables from the moisture analyzer .
Never open the analyzer housing . The parts contained in the housing cannot be
cleaned, repaired, or replaced by the operator .
– Make sure that no liquid or dust gets into the analyzer .
– Remove the disposable sample pan and pan support from the analyzer .
– Never use cleaning agents that contain solvents or abrasive ingredients, which
can ultimately damage the equipment .
t Clean the outside of the housing with a lint-free cloth and mild cleaning agent
(e .g ., isopropanol) .
t Then dry the analyzer with a soft cloth .