Rice Lake MSI-7300 Dyna-Link 2 - Manual (Page 27)

Dyna-Link Setup 23
4.5 Total Mode
The MSI-7300 Dyna-Link 2 can keep track of all weighments using the total feature.
Either manual total, which totals by pushing a configured
USER
key on the front
panel or the optional RF remote display, or auto-total which can be used to
automatically add up each weighment. See the total mode descriptions for details on
the various total modes. To use manual total, you must also program a user key. Auto
total modes do not need a user key, but if a user key is setup for total, then it will
function as a total on/total off.
1) With the 7300 on, press the F2
key and the POWER key
simultaneously.
2) The first item of the setup menu
is Func1. Scroll to totaL with
the
F2 key.
3) To setup the total mode, press
F1 . The current total mode
setting is displayed.
4) Select the total mode by scrolling
through the choices with the F2
key.
In this example, we’ll set the total mode
to the auto-high mode. The auto high
mode uses the highest stable reading
as the total value, and totals when the
load is removed.
5) When the desired total mode
setting is displayed, press F1 .
The next item in the setup menu
appears.
6) Either press ZERO to exit setup
and store all changes, or
continue to another setup menu
item using the
F2 key.
)YQF
)LOWU
Next Setup Menu Item
$/$67
Total last stable load
WRWD/
WWO2Q
Total with pushbutton
Store and return to
weight display
6WRUH
Press Simultaneously
POWER
F2
SCROLL
F2
SCROLL
F2
SCROLL
F2
SCROLL
F2
ENTER/SELECT
F1
ENTER/SELECT
F1
0
EXIT/SAVE
ZERO
F2
SCROLL
$/RDG
Total on stable load
$+L +
Total highest stable Load
0
ZERO
F1
Figure 4-5 Total Mode Setup