2 error codes, Error codes – Rice Lake MSI-7300 Dyna-Link 2 User Manual
Page 52
Advertising
48 MSI-7300 Operator’s Manual
7.2 Error Codes
The ScaleCore processor that is the heart of the MSI-7300 Dyna-Link2 detects errors and
generates error codes to aid in troubleshooting.
Table 7-2. Error Codes
Error Code
Definition
Comment
LcOFF
LC Disabled
A load cell was not enabled
2CAL
In Cal
The system is in calibration mode.
Do not send commands unrelated to
calibration.
unCAL
Not Calibrated
System has not been calibrated.
Error
Load
Overload
Tension/Weight exceeds set
capacity +9d
Load Cell damaged or disconnected
Error
UnLd
Underload
Tension/Weight is more than 20%
negative
Load cell damaged or disconnected
Advertising