3 general information, General information – Rice Lake MSI-7300 Dyna-Link 2 User Manual
Page 8
Advertising
4 MSI-7300 Operator’s Manual
1.3 General Information
1. If the text is discussing a function key, the function key will be displayed as
Fx-
YYYYY
with the programmed user key function in italics. F1 and F2 can both be
programmed to all available user functions.
2. If a function key does not work, it is probably because the Dyna-Link 2 is not
setup to support the key. For example, if the Function key is set for TOTAL, you
must also setup the TOTAL mode in the setup menu.
3. When in setup menus, the
ZERO
key drops back one menu level. At the root
menu level, the
ZERO
key stores the changes and returns to the tension mode.
4. When in setup menus, the
POWER
key returns you directly to the tension
display without storing the changes.
Advertising