Rice Lake MSI-7300 Dyna-Link 2 - Manual (Page 40)

36 MSI-7300 Operator’s Manual
6.0 Communication Setup
The Dyna-Link 2 can communicate with peripheral devices using RS-232 or 802.15.4
wireless. Only one communications type can exist at a time. The RS-232 port located
on the bottom side of the Dyna-Link 2 is useful for setup and calibration using a
computer and MSI’s SCCMP Software (SCCMP operation is detailed in the SCCMP
User Guide).
6.1 RF Option
Since the RF options are easily connected they are commonly used for gathering
weight data after the initial setup of the unit. For RF operation, the Dyna-Link 2 uses
an 802.15.4 transceiver to communicate with the MSI-8000 RF Remote Display.
802.15.4 wireless:
• operates in the 2.4GHz ISM band and does not require the end user to obtain a
license.
• can coexist with other 2.4GHz systems if caution is taken to isolate antennas at
least 10 feet or 3 meters from the Crane Scales and MSI-8000 equipment.
MSI-8000 based RF systems are peer to peer. However, for multiple scale
connections, the MSI-8000 acts as the network coordinator.
Number entry screen
0
TARE
F2
Exit and Cancel Changes
Exit and Save/Back 1 Level
Enter / Select
Scroll
In Menu Key Functions
PRINT STRINGS
6WUQ*
&QWUO
5DWH
2II
8VHU
/RDG
&RQW
Off (default)
F key
On Stable Load
Continuous
PRINT
CONTROL
Print String Output Rate
Number entry screen
(0-65535 seconds)
Print String Format
1= Current Wt
(Wt-Unit-Mode )
2= Net Wt
(Wt-Unit-Net )
3= Gross Wt
(Wt-Unit-Grs )
4= Tare Wt
(Wt-Unit-Tare )
5= Total Wt
(Wt-Unit-Total )
6= Total Count
(#Samples-TCNT )
7= Current Wt
(no units or mode )
8= (Reserved)
9= CR-LF ( )
Affects cont-
inuous mode
only
3ULQW
U)
Print
RF
COMM SETUP MENU
2Q2II
FLG
&KQ/
QHWLG
Enable RF
ScaleCore ID
RF Channel
Network ID
RF
SETUP
Setup Strings
Print Control
Output Rate
Network ID
2Q
2II
Range 1-254, (20-30)
Range 12-23
Range 0 to 99999
RF Network
Number entry screens
F2
Press Simultaneously
F1 F2
6WU(Q
Figure 6-1 COMM Setup Menu