Rice Lake TransAct 3.5 - Manual (Page 106)

Weigh Print Weight, Options, Update Tare, and Reprint Ticket Buttons
Version 3.5 107
Automatically Add Job Items
When checked, a prompt will no longer appear when a ticket item is not part of a job. To turn this
feature on, place and
‘x’ in the option box.
NOTE: Changing this option will affect unattended systems.
List Materials with Rates Only
When checked, only those materials with entries in the selected rate table will be shown in the materials
drop-down list.
Manual Entry in Selected Units
When checked, manual weight entry will be in the units selected. When the Units button during a
transaction is set to Tons, and the Manual scale is used to enter a value in the Weight In and Out fields,
the value being entered will be read as Tons.
NOTE: This feature is only available to use with single weighments. When using this feature for
Incoming transactions, one of the Gross Mode options must also be selected to activate the
Net button in the Transaction Details form.
Weigh
Threshold
The Threshold is the minimum scale weight required before the transaction can be processed.
Tolerance
The Tolerance is the maximum weight the scale can fluctuate before TransAct determines there is
motion on the scale. When a tolerance weight is specified, TransAct recognizes a stable weight + or -
the tolerance weight. For example, when the tolerance is set to 40, TransAct considers a stable weight
to be anywhere between + or - 40 pounds. Enter a positive weight for this field.
Zero Return
When Zero Return is checked, TransAct will not allow transactions to be processed until the weight on
the scale has returned to zero since the last transaction. If the scale has not returned to zero a warning
appears. Click the
OK button to return to the Select Transaction form.