Rice Lake TransAct 3.5 - Manual (Page 79)

Preferences Admin
80 Version 3.5
To return to the scale port setup window, click the Done button. To stop the test screen from scrolling,
click the Pause button.
If the test screen is blank or data is unreadable, the computer port settings are not set properly for the
scale indicator. To return to the scale port setup table to adjust the settings, click the
Done button.
NOTE: The indicator must be set to continuous mode. When interfacing a indicator to a computer,
always use continuous mode versus demand mode.
Scale Port 2 Parameters
This section is used to define a second indicator. The second indicator can be a different scale or be
used in Manual mode.
To setup the indicator on port two (2), select Admin | Preferences | Scale Port 2 from the main menu.
The Set Scale Port 2 Parameters table appears.
Figure 60. Setting Parameters for the Second Scale Port
When a second scale is not used, set the Connector to None . A second indicator window is not displayed
in the Weigh form.
Select the Device Type , Connector (i.e. serial port), and correct settings for the second scale. To view
activity received from the scale, click the Test button. Data will be readable if the settings are correct.
Ticket Printer
Use this section to setup the printer to be used for printing tickets.