Attended vs. unattended – Rice Lake TransAct 3.5 User Manual
Page 123
Axle Weighing
Attended vs. Unattended
124
Version 3.5
Attended vs. Unattended
TransAct provides a number of unattended interfaces. These interfaces are defined as data terminals in
the
Data Terminal
section under
Admin | Preferences
.
When a data terminal is defined, the
Attended
menu button is displayed on the Weigh form.
TransAct must be in the
Weigh
form in order to switch to
Unattended
mode.
Click the
Weigh
button of the menu bar. The
Attended
button becomes active. This designates
the system is running in attended mode.
To switch to
Unattended
mode, click the
Attended
button in the menu bar.
The button changes to the
Unattended
button. All manual features of TransAct are disabled until
the
Unattended
button is clicked and TransAct is put back into
Attended
mode.
Additional documentation has been created to better explain each Unattended feature. Please contact
your TransAct representative to obtain this information.