Rice Lake TransAct 3.5 User Manual
Page 108
Weigh
Print Weight, Options, Update Tare, and Reprint Ticket Buttons
Version 3.5
109
Gross Mode
The
Gross Mode Properties
enables or disables the
Net
button on the weigh form. The
Net
button
provides single-weighment gross weight transactions that set the
Net Weight
equal to the
Weight In
.
Off
When turned off, TransAct will require a value greater than zero (0) to be present in the
Weight Out
field before a transaction can be completed.
Set Net = Weight In
This option is most commonly used to record a weigh only type of transaction. Use this option when
the
Net Weight
should not be included in
Tonnage and Charges
reports.
Example: Company ABC may allow trucks that need a printed weight, to use the scale for a fee.
Company ABC would like to record the transaction, but the weight is not used in any of
their report calculations.
During the Weigh In process, click the
Net
button to copy the
Weight In
(Gross)
into the
Net
field.
Click the
Print Ticket
button to complete the transaction.
NOTE:
To calculate a charge for these types of transactions, add a new item to the material
category. In the
Default Rates
table enter the rate for the new item into the
Tons/Pounds
column and set the
Per Load (Ld)
flag to
Y (Yes).
Set Net and Adj. Net = Weight In
The
Set Net and Adj. Net = Weight In
option is similar to the
Set Net = Weight In
option, except that it
stores the weight for reporting purposes.
Example: This option may be used at a recycle center where a floor scale is used to weigh bales of
recycled plastic. These weights will be included for reporting purposes.
Example: This option may also be used for adding material inventory.
Unattended
Additional documentation has been created to better explain unattended features. Please contact your
TransAct representative to obtain this information.