Getting started – Rice Lake TransAct 3.5 User Manual
Page 17
Getting Started
Welcome
18
Version 3.5
Getting Started
TransAct requires the following hardware and software:
•
A 200+ Pentium compatible processor
•
At least 64MB of RAM
•
A fixed hard disk with a minimum of 3 MB of available disk space to install the program files
(additional space will be required as the database grows)
•
VGA, SVGA, or greater resolution monitor set to 800 x 600 screen area
•
Microsoft compatible mouse
•
Microsoft Windows 95/98/NT/2000/XP (TransAct will run on ME, but is not supported)
When a complete installation of TransAct is performed, the setup program installs all of the files
necessary to run TransAct, creates the TransAct group, and all icons associated with the program.
Installing TransAct
Insert the TransAct for Windows CD-ROM
.
The installation
Welcome
screen appears.
Figure 1. Installation Welcome Window
NOTE:
If setup fails to start automatically, select
Start
from the desktop. Select
Run
from the
Start
menu. In the
Open
field, type
d:setup
(replace
d
with the correct drive letter
for your CD-ROM drive). Click
OK
to start the installation program.
Click the
Next
button to continue.
Click the
Yes
button to agree to the
License Agreement
.