BUCHI KjelSampler K-377 - Manual (Page 117)

6 Operation
117 K-375/376/377 Operation Manual, Version B
6 .9 .3 Diagnostics
In the system diagnostics the actual status of all
system components like valves, pumps, sensors
and switches or fans can be checked.
Each item is displayed in a list and, if currently
active, a green dot is displayed in front of it.
With the button
SERVICE MODE one can switch
to the service mode to actively set each system
component into operation and check it for proper
functioning.
NOTE
The diagnostics dialogs are only accessible for user
with administrator rights! (For users with operator
rights the diagnostics area is “read-only”).
CAUTION
While the service mode is activated, some security-relevant functions are stopped. Executing single
test functions is therefore subject to the operator‘s responsibility. The service mode will be switched
off, as soon as the diagnostics menu is left.
6 .9 .4 Logout
When clicking on Logout, the current user is
automatically logged out and the Login screen is
displayed.
To login to the system, click on one of the present
users and – if a password has been specified for
this user – enter the corresponding password.
NOTE
Each user with operator rights is allowed to change
his own password under the setting „User adminis-
tration“ (See chapter “6.9.1 Settings“).