BUCHI KjelSampler K-377 - Manual (Page 82)

6 Operation
82 K-375/376/377 Operation Manual, Version B
For samples of type Control Blank,
press “Name” and enter a name for the control
blank result.
Press “Method” and select the method to be
used for the determination of the control blank
from the list of the available methods.
Press “Group” and select a result group for the
storage of the result from the list of the available
result groups. (It is also possible to create a new
result group using the
New Group button.)
Using the BALANCE button the weight of samples
can be taken over from a connected balance:
• Select all samples using the SELECT ALL
button
• Press BALANCE – all blanks and control
blanks are automatically deselected (no
weight is needed for blanks)
• Place the first sample on the balance and
press Enter on the balance – the first weight
is taken over from the balance and entered
into the first checked sample in the list.
• Proceed with the next sample
• When all sample weights have been taken
over, the balance mode is automatically left.
NOTE
Using a bar code reader it is also possible to
read in every sample related data like name or
weight from a barcode. The read in data is auto-
matically filled in the active input field.