BUCHI KjelSampler K-377 - Manual (Page 77)

6 Operation
77 K-375/376/377 Operation Manual, Version B
6 .6 .2 Single Sample
In general four different kinds of samples can be determined:
• Blanks (can be used for the correction of sample results).
• Samples
• Reference substances (results can be rejected if a reference substance is outside of its
predefined limits)
• Control blanks (to be determined for information only – can not be used for any sample correc-
tions)
The single sample determination is thought for a small amount of samples to be measured without a
sampler present.
First of all the sample type has to be selected:
• Blank,
• Sample,
• Reference substance or
• Control blank.
According to the selected type of sample,
different parameters are available:
For samples of type Blank,
press “Name” and enter a name for the blank
result.
Press “Method” and select the method to be
used for the determination of the blank from the
list of the available methods.
Press “Group” and select a result group for the
storage of the result from the list of the available
result groups. (It is also possible to create a new
result group using the
New Group button.)