BUCHI KjelSampler K-377 - Manual (Page 80)

6 Operation
80 K-375/376/377 Operation Manual, Version B
Within each sample list all contained samples
are listed together with name, type, method
and weight (except blanks, where no weight is
needed).
Samples are added to the list with the NEW
button. Already existing samples can be deleted
after being selected.
With the SELECT/DESELECT ALL buttons all
samples can be selected/deselected at once.
When adding a new sample, always a sample of
the same type like the previously added sample is
added automatically. All parameters of the newly
added sample can be adapted. Using the buttons
PREVIOUS/NEXT POSITION it is possible to
navigate from one set of sample parameters
to the parameters of the previous or following
sample in the list.
The first parameter for each sample is the sample
type:
• Blank,
• Sample,
• Reference substance or
• Control blank.
Press NEW to enter a sample of the selected
type on the next position without leaving the
screen.
With OK the sample is added to the actual posi-
tion and the sample list is displayed again.
According to the selected type of sample, a
different set of parameters is offered.