Hardy HI 3010 Filler/Dispenser Controller - Manual (Page 24)

HI-3010 Filler/Dispenser/IBC 8
Service Manual
Power:
• 10 Watts maximum with options
Watts available for DeviceNet Power:
• 15 Watts
Common Mode Voltage Range
• ± 2.5 VDC
Common Mode Rejection:
• 100dB @ 50-60Hz
Environmental Requirements:
Operating Temperature Range:
• -10º to 50º C (14º to 122º F)
Storage Temperature Range:
• -20º to70º C (-4º to 158º F)
Temperature Coefficient:
• Less than 0.005% of full scale per degree
C for zero and span.
Humidity Range:
• 0-90% (non-condensing)
Approvals:
• CE
• UL
• CUL
Instrument Local I/O:
• 5 mappable inputs optically isolated
• 4 mappable outputs 48-240 VAC Form A
Electronic
• 3rd party mappable over DeviceNet
Physical Characteristics:
Panel Mount (Model # HI 3010-PM)
Depth
• 8.03" (203.96mm) Back of the Bezel to
rear cable clearance.
Case Dimensions
• 6.125"H x 8.56"W x 6.03"D (155.57mmH
x 217.42mmW x 1.53.16mmD)
Front Panel Dimensions
• 7.686" H x 9.40" W x 0.625" D
(195.22mm H x 247.39mm W x
15.87mmD)
Panel Cutout Dimensions
• 6.75" H x 8.94" W (1775mm H x 227mm
W)
Case Material
• GE Cycolac Type KJW - Flame Retardant
ABS (Acrylanitrile Butadiene Styrene)
Weight
• 4.6 pounds (2.1 Kilograms)
Rating
• Front Panel NEMA 4 Seal
Wall Mount (HI 3010-MB)
Base Dimensions
• 9.3” L x 4.0” W (236.22mm L x
101.60mm W)
Overall Height with HI 3010 installed, as measured
from the base to the top of the front plate.
• 11.77” High (298.96mm H)
Swivel Material
• 304 Stainless Steel
Specifications for I/O Option Boards
Profibus Option Board
Power Supply:
• +5V max - 350mA
Operating Temperature:
• 0 - 70° C (32° - 158° F)