Hardy HI 6500 Series - Manual (Page 139)

Security 129
•
•
•
•
•
•
Chapter 8
• • • • • •
Security
Chapter 8 covers the security menu, which allows the user to lock out different levels
of the menu hierarchy. The user configurable security settings only limit access
through the front panel to ensure the consistency of the instrument setup and weighing
process. Parameter configuration through the network is unaffected by these security
settings.
Display Security Options
The current status and password for each level of security can be read and changed through
the web browser if using an Ethernet connection, or through the serial interface.
Lock Enabled Operation
Display Display is blank; and the Mode, Tare, Zero, and Configuration
buttons are disabled. Pressing ENTER jumps to the password
prompt.
Keypad Display is active; and the Mode, Tare, Zero, and Configuration
buttons are disabled. Pressing ENTER jumps to the password
prompt.
Configuration Display is active, and the Mode, Tare, and Zero buttons are active;
but the configuration button is disabled. Pressing CONFIG jumps
to the configuration password prompt.
Read Only Display is active, and the Mode, Tare, and Zero buttons are active,
the configuration button is active but no parameters can be
modified.
Calibration Display is active, all buttons are active, and all the parameters
except the calibration parameters can be modified.
No Locks Enabled When no locks are selected, the display is active, all buttons are
active, and all the parameters can be modified.