Hardy HI 6500 Series - Manual (Page 96)

86 Chapter 5
•
•
•
•
•
•

Wait Time Parameter
The Wait Time parameter is the amount of time the instrument waits before entering power
saving mode. The time unit for the Wait Time parameter is in integer multiples of minutes.
The Wait Time can be set between 0 and 480 minutes (8 hours).
On the HI 6500 series instrument display, select the communication menu and use the UP
or DOWN button to select the Power Saving submenu, then select the Wait Time submenu.
The current Wait Time value will be displayed, press the ENTER or the RIGHT button if
the value needs to be modified.
Set Background Parameter
The Set Background parameter sets the monochrome level of the display background, the
non-text areas of the display, in 32 equal steps, shown as a progress bar.
The Set Background value can be any value between 0 (Black) and 31 (White) as shown in
the parameter dump.
On the HI 6500 series instrument display, select the display menu and use the UP or
DOWN button to select the Set Background submenu. The current background level will
be displayed, press the ENTERbutton if the level needs to be modified, and use the LEFTor
RIGHT buttons to set the required background level. Press the ENTER button to set and
save the background value.
Set Foreground Parameter
The Set Foreground parameter sets the monochrome level of the display foreground, in
other words the text areas of the display, in 32 equal steps shown as a progress bar.
The Set Foreground value can be any value between 0 (Black) and 31 (White) as shown in
the parameter dump.