Hardy HI 6500 Series - Manual (Page 171)

Troubleshooting 161
•
•
•
•
•
•
Tests and Diagnostics
The Test and Diagnostics menus provide an expanded view of how the weight processor
and scale are working. You can run several tests from either the test links on the Web
Diagnostic page or the front panel Test menu. Each test is described in its own subsection
below.
You can also obtain information that a Hardy representative may ask for if you make a
request to Technical Support. For example, for the last calibration, you can see the type of
calibration and when it was done. You can also check the graduation size, operator ID, and
other configuration information, and you can learn the serial number, model number,
firmware revision number.
Diagnostic testing from the front panel
From the Configuration menu, use the down arrow to select Diagnostics and press Enter
to open the Menu. This menu lists the tests you can run.
Use the down arrow to select the option.
NOTES The values entered in the Diagnostics Menu are for illustration purposes only. Your values
will vary.
To download the latest firmware version, see the HI 6500/Downloads page at:
http://www.hardysolutions.com/products/weighing-instruments/weight-
processors/product/461/hi-6500-series